Get in touch

News

Home >  News

DC Micro Motor Maintenance: Tips for Extending the Life of Your Motors

Time: 2024-09-26 Hits: 0

Of late, the DC micro motors have been the center of several industries both in precision engineering and automation. These small motors enable the operation of numerous applications such as the medical field, robots and toys as well as to sophisticated electrical products. Among the well-established players in this sector, Jixin is among the few who provide reliable, high-quality miniaturized motors which are used worldwide in different sectors. But, even the best of the best motors must go through regular maintenance in order to keep performing well for a long time.

Dust the Motor

The first procedure in caring for all motors including the Jixin MPB41-230S or DC micro motors is cleaning. The surface and inside of the motor may-cause excessive friction, heat and finally abnormal wear or failure of the motor due to the deposits of dust, dirt or other particles with time. Use cotSil or Dopp neat to remove dust for the protection of intricate parts of the motor. Do not apply any fluids or solvents since they may invade internal parts.

Regulation of Voltage and Currents

It is important to note that operating Jixin DC micro motors, especially the improvised or modified versions, beyond their recommended voltage and current ranges will eventually lead to won damage upon normal wear which shifts the expected lifespan down by many notches and mechanics recomended sinusoidal synchronous magnets for N54. It is procedurally right to dim the discontent of the power supply. Where sudden high surges and floods occur, these could ruin the windings of the motor and its electronics completely.

Thermal Management

Heat is the number one enemy of all functions and equipment such as the dc micro motors. Heat increases would char the insulation, thaw the bearings, warp the insides of bodies and in drastic situations melt down the components. Jixin motors should be used in an appropriate environment where adequate heat management systems are provided and there should be no obstruction when Aquarius are in operation. During thermal scanning of the motor while in operation, this could also be useful in intercepting the likelihood of faults that appear to be life threatening.

Avoiding Overloading

Excessive overheating of the housing is firmly ruled out, for lack of appropriate measures to scavenge the waste energy in DC micro motor, especially where excessive amounts of torque, load or ratios exceeding the normal set parameters could fast track the process of exhaustion of the component features. Always put your Jixin motors at the required operations of torque and speed. For instance whenever the current capacity of the motor has to be increased, installing an upward move model is advisable rather than operating the already fitted less capacity motor at its maximum limits..

Periodic Examination

Make sure to make regular examinations of your Jixin DC micro motors since that way it is easier to find and eliminate future issues that might transform into larger problems. Assess whether any bearings are damaged, wires are frayed, and if overheating or corrosion are evident. Carry out timely replacement of worn-out parts to avoid extensive damage.

Storage and Handling

In the same vein, correct handling and storage of your Jixin motors can also help extend their life span. Place them in an environment that is clean and dry and not too hot or too humid or under direct sunlight. When using the motors, care should be taken not to drop them or hit them against objects to prevent internal parts from getting damaged.

PREV : DC Micro Motor Technology: The Heart of Miniature Devices

NEXT : DC Micro Motor Applications: From Toys to Medical Devices

If you have any suggestions, please contact us

CONTACT US

2024 © Shenzhen Jixin Micro Motor Co.,Ltd  -  Privacy policy